Raspberry Pi Pico Basic Kit

Raspberry Pi Pico Basic Kit

Raspberry Pi Pico Basic Kit

2,199.00 (1,863.56 + GST)

Out of stock

2,199.00 (1,863.56 + GST)

Raspberry Pi Pico Basic Kit is a getting started kit for beginners who want to explore the new Raspberry Pi Pico. The kit includes Basic Input/Output devices like Push Buttons, LEDs and Resistors to understand the basic working principle of Raspberry Pi Pico. After a little success with these IO Devices, it will be interesting to explore more about it.

Availability: Out of stock SKU: 2987 Categories: , Tags: , , ,

Description

Raspberry Pi Pico Basic Kit is a getting started kit for beginners who want to explore the new Raspberry Pi Pico. The kit includes breadboard, Basic Input/Output devices like Push Buttons, LEDs and Resistors to understand the basic working principle of Raspberry Pi Pico. After a little success with these IO Devices, it will be interesting to explore more about it. It is very useful during development of any Raspberry Pi Pico Projects.

Sensors:

Once we get to know about basics, we can use various sensors like IR Sensor, LDR, Ultrasonic Sensor and PIR Sensor interfacing with the Raspberry Pi Pico.

Actuators:

Actuators are output devices that can be controlled by the Pico. For the basic learning purpose, we included TB6612FNG H-Bridge Motor Driver (better than L298N). With this we can control Motors, Fan, etc. The Motor driver supports PWM Speed control upto 100KHz. It can also be used with mini DC Water pump included with the kit. With this you can make automatic plant watering system (soil moisture sensor not included).

Servo Motor is also a most used actuator in electronics. The kit includes SG90 Servo with it.

Components:

Along with these the kit contains various components like 7805 Voltage Regulator to regulate power supply for the Pico and other devices. Alligator Clips with wire for testing. Various LEDs and Resistors. Potentiometer for Analog Input, Breadboard and RGB LED for cool projects.

Display:

The kit comes with a 0.91 inch OLED I2C Display for displaying any sensor values and learn about I2C Communication devices.

Best Resources for Getting Started Projects:

  • A comprehensive getting started guide for Raspberry Pi Pico by Bill from Dronebot Workshop

 

Raspberry Pi Pico Basic Kit Includes:

1 x Raspberry Pi Pico (Soldered)

1 x ERD microUSB Cable

1 x MB102 Breadboard 840 Points

1 x IR Proximity Sensor

1 x 4 Channel Level Shifter

5 x Small Push Buttons (6x6x5mm)

1 x 22K Potentiometer

5 x 10K Preset Potentiometer

1 x 0.91 inch OLED I2C Display

1 x TB6612FNG H-Bridge MOSFET Based Motor Driver

1 x DC Toy Motor

1 x Fan for DC Toy Motor

1 x 7805 Voltage Regulator

1 x DC Water Pump

10 x LED 5mm Red

10 x LED 5mm Green

10 x LED 5mm Yellow

10 x LED Super Bright 5mm Blue

1 x RGB LED Common Anode

1 x RGB LED Common Cathode

40 x Male to Male Jumper Wire

20 x Male to Female Jumper Wire

10 x Female to Female Jumper Wire

5 x Resistor 0.25W 5% (150K)

5 x Resistor 0.25W 5% (220R)

5 x Resistor 0.25W 5% (1K)

5 x Resistor 0.25W 5% (10K)

5 x Resistor 0.25W 5% (470R)

5 x Resistor 0.25W 5% (330R)

1 x LDR(Small)

1 x HCSR04 Ultrasonic Sensor

1 x Ultrasonic Mounting Bracket

1 x PIR Sensor

1 x Crocodile Clip with Wire (10pcs)

1 x Buzzer-PCB Mount

1 x SG 90 Servo

1 x 9V Battery

1 x Battery Snap

1 x DC Jack Male

1 x GPIO Reference Card

1 review for Raspberry Pi Pico Basic Kit

  1. 5 out of 5

    harshsinghrajawat86

    Amazing Product


Only logged in customers who have purchased this product may leave a review.