TB6612FNG H-Bridge MOSFET Based Motor Driver

TB6612FNG H-Bridge MOSFET Based Motor Driver

TB6612FNG H-Bridge MOSFET Based Motor Driver

190.00 (161.02 + GST)

In stock

190.00 (161.02 + GST)

  • Power supply voltage: VM=15V max, VCC=2.7-5.5V
  • Output current: Iout=1.2A(average) / 3.2A (peak)
  • Standby control to save power
  • CW/CCW/short brake/s motor control modes
  • Built-in thermal shutdown circuit and low voltage detecting circuit
  • All pins of the TB6612FNG broken out to 0.1″ spaced pins
  • Filtering capacitors on both supply lines
Availability: In stock SKU: 3545 Category:
Buy this product to earn 2 Maker Points worth ₹2.
View cart

Description

TB6612FNG H-Bridge MOSFET Based Motor Drivers can control 2 motors with current up to 3.2A in total (1.2 each). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes – CW, CCW, short-brake, and s. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.CJMCU. Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

Features:

  • Power supply voltage: VM=15V max, VCC=2.7-5.5V
  • Output current: Iout=1.2A(average) / 3.2A (peak)
  • Standby control to save power
  • CW/CCW/short brake/s motor control modes
  • Built-in thermal shutdown circuit and low voltage detecting circuit
  • All pins of the TB6612FNG broken out to 0.1″ spaced pins
  • Filtering capacitors on both supply lines

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.