2.4-inch SPI Interface 240×320 TFT Display Module

Description

This 2.4-inch SPI Interface 240×320 TFT Display Module for DIY Projects.

Features:

1. It is a 2.4″ SPI TFT LCD Screen Module
2. 10pins interface.
3. Not just an LCD break but include SD card (2GB),
4. The LCD drive ic is ILI9341.
5. It’s a 240 * 320 (resolution),
6. 2.4 inch TFT LCD screen.
7. The LCD has a wide viewing angle, the contrast is also very suitable.
8. The display interface is serial, it just needs 5 wires (CS, RS, SCL, SDA, RST) for controlling.
9. SDcard use hardware SPI interface (CS / MOSI / MISO / SCK), Not solder pins

Pin Details:

• SDO: Serial clock output
• LED: 3.3V IO and Power Supply pin
• SCL: Serial clock input
• SDA / SDI: Serial data input
• DC: Data / Command selection
• RST: Reset, Low level active
• CS: Chip Selection, Low level active
• GND: Ground
• VDD33: 3.3V Power Supply pin
• UTFT Support

Specifications:

• It is a 2.4″ SPI TFT LCD Screen Module
• 10pins interface.
• The LCD drive ic is ILI9341.
• It’s a 240 * 320 (resolution)