Raspberry Pi Camera Module 3 NoIR

Raspberry Pi Camera Module 3 NoIR

Raspberry Pi Camera Module 3 NoIR

2,799.00 (2,372.03 + GST)

Out of stock

2,799.00 (2,372.03 + GST)

  • Variant: Standard NoIR
  • Sensor: Sony IMX708
  • Resolution: 11.9 megapixels (12MP)
  • Sensor size: 7.4mm sensor diagonal
  • Pixel size: 1.4μm × 1.4μm
  • Horizontal/Vertical: 4608 × 2592 pixels
  • Common video modes: 1080p50, 720p100, 480p120
  • Output: RAW10
  • IR cut filter: Integrated in standard variants; not present in NoIR variants
  • Autofocus system: Phase Detection Autofocus
  • Cable connector: 15 × 1mm FPC

Available Variants: Camera Module 3, Camera Module 3 NoIR, Camera Module 3 Wide, Camera Module 3 Wide NoIR

Raspberry Pi Camera Module 3 NoIR

Description

Raspberry Pi Camera Module 3 is a compact camera from Raspberry Pi. It offers an IMX708 12-megapixel sensor with HDR, and features phase detection autofocus. Camera Module 3 is available in standard and wide-angle variants, both of which are available with or without an infrared cut filter.

Camera Module 3 can be used to take full HD video as well as stills photographs, and features an HDR mode up to 3 megapixels. Its operation is fully supported by the libcamera library, including Camera Module 3’s rapid autofocus feature: this makes it easy for beginners to use, while offering plenty for advanced users. Camera Module 3 is compatible with all Raspberry Pi computers.1

The PCB size and mounting holes remain the same as for Camera Module 2. The Z dimension differs: due to the improved optics, Camera Module 3 is several millimetres taller than Camera Module 2.

raspbery-pi-camera3-variants-comparison-v2

Enhancements over it’s predecessor:

  • Improved lowlight sensitivity.
  • High dynamic range (HDR) support.
  • Powered autofocus.

All variants of Camera Module 3 feature:

  • Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
  • High signal-to-noise ratio (SNR)
  • Built-in 2D Dynamic Defect Pixel Correction (DPC)
  • Phase Detection Autofocus (PDAF) for rapid autofocus
  • QBC Re-mosaic function
  • HDR mode (up to 3 megapixel output)
  • CSI-2 serial data output
  • 2-wire serial communication (supports I2C fast mode and fast-mode plus)
  • 2-wire serial control of focus mechanism

Technical Specifications:

  • Variant: Standard NoIR
  • Sensor: Sony IMX708
  • Resolution: 11.9 megapixels
  • Sensor size: 7.4mm sensor diagonal
  • Pixel size: 1.4μm × 1.4μm
  • Horizontal/Vertical: 4608 × 2592 pixels
  • Common video modes: 1080p50, 720p100, 480p120
  • Output: RAW10
  • IR cut filter: Integrated in standard variants; not present in NoIR variants
  • Autofocus system: Phase Detection Autofocus
  • Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants)
  • Ribbon cable length: 200mm
  • Cable connector: 15 × 1mm FPC
  • Compliance: FCC 47 CFR Part 15, Subpart B, Class B Digital Device, Electromagnetic Compatibility Directive (EMC) 2014/30/EU, Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
  • Production lifetime: Raspberry Pi Camera Module 3 will remain in production until
    at least January 2030

Package Includes:

1 x Raspberry Pi Camera Module 3 NoIR

Brand

Raspberry Pi

Raspberry Pi Camera Module 3 NoIR

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.