Raspberry Pi 4 Starter Kit – 8GB RAM

Raspberry Pi 4 Starter Kit – 8GB RAM

Raspberry Pi 4 Starter Kit – 8GB RAM

8,324.008,920.00

In stock

8,324.008,920.00

Choose your preferred SD Card Size on the drop-down.

Kit Contents:

Other RAM Variants:  2GB RAM | 4GB RAM | 8GB RAM

SKU: N/A Category: Tag:
Buy this product to earn up to 90 Maker Points.
Clear
View cart

Description

Raspberry Pi 4 8GB RAM Starter kit comes with all the necessary getting started accessories with it.

Raspberry Pi 4 Model B – Your tiny, dual-display, desktop computer and robot brains, smart home hub, media center, networked AI core, factory controller, and much more.

Faster and More Powerful upgrades now:

  • Type C Power Supply
  • 2 microHDMI
  • USB 3.0
  • LPDDR4-2400 SDRAM

Raspberry Pi 4B Specifications:

  • Processor: Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC
  • Processor Speed: 1.5 GHz
  • 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)
  • Wireless Connectivity: 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
  • Gigabit Ethernet
  • 2 USB 3.0 ports; 2 USB 2.0 ports.
  • Raspberry Pi standard 40 pin GPIO header (fully backwards compatible with previous boards)
  • 2 × micro-HDMI ports (up to 4kp60 supported)
  • 2-lane MIPI DSI display port
  • 2-lane MIPI CSI camera port
  • 4-pole stereo audio and composite video port
  • H.265 (4kp60 decode), H264 (1080p60 decode, 1080p30 encode)
  • OpenGL ES 3.0 graphics
  • Micro-SD card slot for loading operating system and data storage
  • Recommended Power Supply: 5V DC via USB-C connector (minimum 3A*)
  • 5V DC via GPIO header (minimum 3A*)
  • Power over Ethernet (PoE) enabled (requires separate PoE HAT)
  • Operating temperature: 0 – 50 degrees C ambient, CPU Temperature may go upto 80 degrees C at full load

New Operating System: Raspbian Buster (Also compatible for older Models)

The Raspberry Pi 4 Starter Kit Includes:

Note: The Power Supply colors will be Black/White depends on availability of stocks.

Troubleshooting a 64GB or Higher SDXC Cards:

Solution Steps – Formatting an SDXC card for use with NOOBS

According to the SD specifications, any SD card larger than 32GB is an SDXC card and has to be formatted with the exFAT filesystem. This means the official SD Formatter tool will always format cards that are 64GB or larger as exFAT.

If you want to use NOOBS on a card that is 64GB or larger, you need to reformat it as FAT32 first before copying the NOOBS files to it.

Check out the official troubleshooting documentation on Raspberry Pi Website here.

Additional information

SD Card with NOOBS(Optional)

None, 16 GB, 32 GB, 64 GB

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.

Due to the upgrades in OS and Bootloader, or if the SPI EEPROM has become corrupted, the pi may not be able to boot. You can follow the official Raspberry Pi Documentation to update your Bootloader. Visit Official Raspberry Pi Downloads page here and follow the instruction.

Recovery

If your Raspberry Pi 4 will not boot, it is possible that the SPI EEPROM has become corrupted.

To check, remove the SD card, disconnect the device from power, then reconnect it. If the green LED does not flash, you will need to reprogram the EEPROM:

  1. Download the bootloader
    SHA-256: 444e0f68aa21d5b4e158259061de55738d36a1986e2ced14bb14d7af1a04881c
  2. Extract it to an empty FAT-formatted SD card and insert it into your Raspberry Pi 4
  3. Connect the power and wait for the green LED to flash quickly

Notes:

  • The updated bootloader improves compatibility with HATs by changing the behaviour of HALT to keep the 3V3 pin powered (view the full bootloader release notes)
  • The previous bootloader remains available for download