Raspberry Pi 4 Case Fan (Official)

Raspberry Pi 4 Case Fan (Official)

Raspberry Pi 4 Case Fan (Official)

425.00 (360.17 + GST)

Out of stock

425.00 (360.17 + GST)

Works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.

  • Fits perfectly into the lid of the Raspberry Pi 4 Case
  • Temperature-controlled fan delivers up to 1.4CFM of air flow over the processor, memory, and power management IC
  • 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor

Package Includes:

1 x Raspberry Pi 4 Case Fan (Official)

1 x Heat Sink

Availability: Out of stock SKU: 2589 Categories: , Tags: , ,
Raspberry Pi 4 Case Fan (Official)

Description

Works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Designed for overclockers and other power users, it keeps your Raspberry Pi 4 at a comfortable operating temperature even under heavy load.

Features

  • Fits perfectly into the lid of the Raspberry Pi 4 Case
  • Temperature-controlled fan delivers up to 1.4CFM of air flow over the processor, memory, and power management IC
  • 18mm × 18mm × 10mm heatsink with self-adhesive pad improves heat transfer from the processor

Case Fan Installation

Assembling your fan with your case:

 

pi4-case-fan-installation-factoryforward

 

  1. Paste the Heatsink on the Processor (remove the backing paper from the self-adhesive pad).
  2. Mount the Raspberry Pi in the bottom case. Make sure it fits well at the holes at corners.
  3. Insert the fan into the upper half (lid) of the case, with the green label facing away from the lid and the Pi Logo on left and Green Label is visible. Push gently but firmly so that the two tabs on the fan housing click neatly into place inside the tabs on the lid. The slightly curved edge of the housing should be flush with the underside of the lid.
  4. Connect the three leads from the fan to the Raspberry Pi’s GPIO pins, as shown in the diagram below. Take care to connect each lead to the correct pin.
  5. Fit the lid of the case onto the base.

Video Guide: How to Setup Your Case Fan

 

Setup auto speed control as per your required threshold:

Once you have connected your fan, by default it will be on whenever your Raspberry Pi is running. You can configure it to turn on only when your Raspberry Pi reaches a temperature that you choose.

Using a recent version of Raspberry Pi OS, first update to retrieve any recent changes to the operating system:

  1. Open the Terminal, either from the Start menu (click the Raspberry Pi icon in the top left corner) or by pressing Control + Alt + T.
  2. Type sudo apt update and then, when the update has finished, type sudo apt full-upgrade.

Then open the Raspberry Pi Configuration tool:

  1. Click on the Raspberry Pi icon in the top left corner and select Preferences then Raspberry Pi Configuration.
  2. Select the Performance tab.
  3. Next to Fan, click Enabled.
  4. If you have connected your fan as shown above, the default of 14 for Fan GPIO does not need to be changed.
  5. Select the Fan Temperature at which you want your fan to turn on. The default is 80°C, which will stop the Raspberry Pi throttling on difficult tasks without having the fan on all the time.

Documents

Compliance

CE and FCC declarations of conformity are available to view and download.

Global compliance certificates for Raspberry Pi products.

Package Includes:

1 x Raspberry Pi 4 Case Fan (Official)

1 x Heat Sink

Brand

Raspberry Pi

Raspberry Pi 4 Case Fan (Official)

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.