MAX30102 Pulse Oximeter Heart Rate Sensor Module

MAX30102 Pulse Oximeter Heart Rate Sensor Module

MAX30102 Pulse Oximeter Heart Rate Sensor Module

349.00 (295.76 + GST)

In stock

349.00 (295.76 + GST)

  1. Optical sensor: IR and red LED combined with a photodetector
  2. Measures absorbance of pulsing blood
  3. I2C interface plus INT pin
  4. 3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and
  5. high-performance analog front
  6. Ultra low power operation increases battery life for wearable devices
Availability: In stock SKU: 2862 Category: Tags: , , ,
Buy this product to earn 3 Maker Points worth ₹3.
View cart

Description

The MAX30102 is an integrated pulse oximetry and heart-rate monitor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection. The MAX30102 provides a complete system solution to ease the design-in process
for mobile and wearable devices.

The MAX30102 operates on a single 1.8V power supply and a separate 3.3V power supply for the internal LEDs. Communication is through a standard I2C-compatible interface. The module can be shut down through software with zero standby current, allowing the power rails to
remain powered at all times.

The MAX30102 has an on-chip temperature sensor for calibrating the temperature dependence of the SpO2 subsystem. The temperature sensor has an inherent resolution of 0.0625°C.

Note: Need to use 4.7K Ohm Pullup resistors on SCL and SDA Pins (SCL – 4.7K Ohm – VCC) (SDA – 4.7K Ohm – VCC) as because the board is designed for used with another board that consists of pull up resistor on it. We included the 4.7K Ohm Resistor if you are going to use it for prototyping purpose with Arduino Microcontrollers.

Applications

  • Wearable Devices
  • Fitness Assistant Devices
  • Smartphones
  • Tablets

Benefits and Features

  • Heart-Rate Monitor and Pulse Oximeter Sensor in LED Reflective Solution
  • Tiny 5.6mm x 3.3mm x 1.55mm 14-Pin Optical Module
  • Integrated Cover Glass for Optimal, Robust Performance
  • Ultra-Low Power Operation for Mobile Devices
  • Programmable Sample Rate and LED Current for Power Savings
  • Low-Power Heart-Rate Monitor (< 1mW)
  • Ultra-Low Shutdown Current (0.7µA, typ)
  • Fast Data Output Capability
  • High Sample Rates
  • Robust Motion Artifact Resilience
  • High SNR
  • -40°C to +85°C Operating Temperature Range

MAX30102 Datasheet

The libraries can be found in the Arduino IDE–>Manage libraries

GitHub link for – Max3010x pulse and proximity sensor by SparkFun Electronics

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.