GY-87 / HW-290 10DOF Accelerometer, Gyroscope, Magnetometer and Barometer Sensor

GY-87 / HW-290 10DOF Accelerometer, Gyroscope, Magnetometer and Barometer Sensor

GY-87 / HW-290 10DOF Accelerometer, Gyroscope, Magnetometer and Barometer Sensor

585.00 (495.76 + GST)

Out of stock

585.00 (495.76 + GST)

Description

The GY 87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor has 3 in one MPU6050 3x Axis accelerometer sensor and 3x Axis gyroscope sensor, HMC5883L Triple Axis Magnetometer, BMP180 Barometric Pressure Sensor.

It possesses built-in ultra low noise linear LDO voltage regulator, built-in on-board filters, which reduce noise from the motor and other high current electronics. It has all sensors connected to I2C bus, you can easily select two I2C address for MPU6050 by soldered jumper, power LED and build in Logic level converter for I2C.

MPU6050 :

The MPU-6050 devices combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon die, together with an onboard Digital Motion Processor (DMP™), which processes complex 6-axis MotionFusion algorithms. The device can access external magnetometers or other sensors through an auxiliary master I²C bus, allowing the devices to gather a full set of sensor data without intervention from the system processor.

For precision tracking of both fast and slow motions, the parts feature a user-programmable gyro full-scale range of ±250, ±500, ±1000, and ±2000 °/sec (dps), and a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g. Additional features include an embedded temperature sensor and an on-chip oscillator with ±1% variation over the operating temperature range.

HMC5883 :

The HMC5883 is a surface mount multi-chip module designed for low field magnetic sensing with a digital interface for applications such as low cost compassing and magnetometry. The HMC5883 includes our state of the art, high-resolution HMC118X series magneto-resistive sensors plus Honeywell developed ASIC containing amplification, automatic degaussing strap drivers, offset cancellation, 12-bit ADC that enables 1° to 2°compass heading accuracy. Applications for the HMC5883 include Mobile Phones, Netbooks, Consumer Electronics, Auto Navigation Systems, and Personal Navigation Devices.

BMP180 :

This precision sensor is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! Using the sensor is easy.

The BMP180 is the next-generation of sensors and replaces the BMP085. The good news is that it is completely identical to the BMP085 in terms of firmware/software – you can use our BMP085 tutorial and any example code/libraries as a drop-in replacement. The XCLR pin is not physically present on the BMP180 so if you need to know that data is ready you will need to query the I2C bus.

APPLICATIONS:
  1. FPV, RC and Robots systems
  2. GPS navigation systems
  3. Impact recognition and logging
  4. Gaming and virtual reality input devices
  5. Motion-activated functions
  6. Intelligent power saving for handheld devices
  7. Vibration monitoring and compensation
  8. Free-fall detection
  9. 6D-orientation detection

 

Features :

  1. 3-axis Gyro+Acceleration+Magnetic Fiel
  2. Air Pressure Module
  3. Build in ultra low noise linear LDO voltage regulator
  4. Built-in onboard filters, which reduce noise from motor and other high current electronics
  5. You can easily select two I2C address for MPU6050 by soldered jumper
  6. Power LED
  7. Build in Logic level converter for I2C
  8. Designed for 5V logic level

MPU6050 DATASHEET

 

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.