GY-61 ADXL335 3 Axis Analog Accelerometer Sensor

GY-61 ADXL335 3 Axis Analog Accelerometer Sensor

GY-61 ADXL335 3 Axis Analog Accelerometer Sensor

275.00 (233.05 + GST)

In stock

275.00 (233.05 + GST)

Buy this product to earn 3 Maker Points worth ₹3.
View cart


GY-61 The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product
measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.

The sensor works on power between 1.8V to 3.6VDC (3.3V optimal), and typically consumes just 350µA of current. However, an on-board 3.3V regulator makes it a perfect choice for interfacing with 5V microcontrollers such as the Arduino.

This breadboard friendly board breaks out every pin of the ADXL335 to a 6-pin, 0.1″ pitch header. This includes 3 analog outputs for X, Y and Z axis measurements, 2 supply pins and a self-test pin which allows you to check the functioning of the sensor in the final application.

The analog outputs are Ratiometric, meaning 0g measurement output is nominally equal to half of the 3.3V supply voltage (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.

Here are the complete specifications of ADXL335 Accelerometer IC.

Operating Voltage1.8V – 3.6V (3.3V Suggested)
Operating Current350μA (typical)
Sensing Range±3g (Full Scale)
Temperature Range−40 to +85°C
Sensing axis3 axis
Sensitivity270 to 330mV/g (Ratiometric)
Shock ResistanceUp to 10,000g


  • Three-axis magnetic field accelerometer module
  • Compact size, low power supply
  • Used for game systems, mobile devices, etc




There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.