Basic KK 2.1.5 and Flysky CT6B Quadcopter Kit

Basic KK 2.1.5 and Flysky CT6B Quadcopter Kit

9,890.00 (8,381.36 + GST)

Out of stock

9,890.00 (8,381.36 + GST)

Build your own quadcopter by using our Basic KK 2.1.5 and Flysky CT6B Quadcopter Kit which will help you to build your drone easier and compatible hardware. By buying our Basic KK 2.1.5 and Flysky CT6B Quadcopter Kit you will get all the products in one package which saves your money and time. 

Note: Battery is not included. You need to purchase it separately. Recommended battery type for this kit is 3S (11.1v).

Availability: Out of stock SKU: 2857 Category: Tags: , , , , ,

Description

Build your own quadcopter by using our Basic KK 2.1.5 and Flysky CT6B Quadcopter Kit which will help you to build your drone easier and compatible hardware. By buying our Basic KK 2.1.5 and Flysky CT6B Quadcopter Kit you will get all the products in one package which saves your money and time. 

Note: Battery is not included. You need to purchase it separately. Recommended battery type for this kit is 3S (11.1v) LiPo Battery. The mAh in battery determines the flight time so choosing a higher mAh increases the flying time but also note that, it will increase the weight of your drone. Various LiPo Batteries are available here.

Specifications:

KK2.1.5:

  • Size: 50.5mm x 50.5mm x 12mm
  • Weight: 21 gram (Inc. buzzer)
  • IC: Atmega644 PA
  • Gyro/Acc: 6050MPU
  • Auto-level: Yes
  • Input Voltage: 4.8-6.0V
  • AVR interface: standard 6 pin
  • Signal from Receiver: 1520us (5 channels)
  • Signal to ESC: 1520us
  • Firmware Version 1.6

Simonk 30A ESC:

  • This 30 amp ESC for BLDC has onboard BEC.
  • This ESC comes with a male dean T-connector.
  • Auto Low BATTERY Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell lipo.
  • APPLICATION: Multirotors, Rc Airplanes, etc.

This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv, 2200kv)

BLDC Brushless motor :

  • Number of cells: 2-3s Lipo
  • Maximum efficiency current: 6-12A (·>75%)  No load current (10v): 0.7A
  •  Maximum current: 16A/60
  • Maximum efficiency: 78%
  •  Internal resistance: 65mΩ
  •  Poles: 14
  •  Maximum watts: 180W
  •  Motor bolt pattern (back of motor): 16mm x 19mm (hole to hole)
  •  X-mount hole pattern: 32mm x 32mm (hole to hole)
  •  Dimensions  Motor size: 27.5mm x 30mm
  •  Shaft size: 3.17mm
  •  Weight: 47g

F450 Frame :

FrameF450
Diagonal wheelbase450mm
Frame weight282g
Takeoff weight800g-1600g

 

FS-CT6B TX and RX

  • Channels: 6
  • Frequency: 2.4GHz
  • Type 2 remote control. (Throttle on the left side)
  • Transmitter power: 0.8W
  • Requires 8 AA size batteries
  • Four model memory
  • Computer programmable
  • USB programming cable and program CD included 

B3 AC charger :

  • Input Voltage: 110-240 V AC
  • Output Current: 3× 700 mA
  • Display: 3× Bicolor LED Max.
  • Charging Current: 3× 850 mA
  • Size: 100 mm * 60mm * 35mm
  • Battery : 2-3s lipo
  • Weight: 180 g

Kit includes :

Product Name Quantity
F450 Quadcopter Frame with PCB1
A2212 BLDC 1400KV Motors 4
Simonk 30A ESC4
KK2.1.5 Flight Controller Board1
1045 Propellers (CW & CCW)2 Pair
Flysky FS-CT6B Transmitter and Receiver (Battery Not Included)1
IMAX B3 Charger 1
32 in 1 Multi-Purpose Precision Screwdriver1
Battery Strap1
Zip Ties1 Pack

Your suggestions are welcome. If you need any additional products that can make this kit better, we will consider your suggestion on upgrading the kit. Please leave us your thoughts in comments or in the email.

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.