Advanced KK2.1.5 and Flysky FSi6 Quadcopter Kit

Advanced KK2.1.5 and Flysky FSi6 Quadcopter Kit

Advanced KK2.1.5 and Flysky FSi6 Quadcopter Kit

11,499.00 (9,744.92 + GST)

Out of stock

11,499.00 (9,744.92 + GST)

Build your own quadcopter by using our advanced kk2.1.5 combo kit which will help you to build your first drone easier with all compatible hardwares. By buying our advanced KK 2.1.5 combo kit you will get all the products in one package which saves you money and time.

Note: Battery is not included. You need to purchase it separately. Recommended battery type for this kit is 3S (11.1v).

Availability: Out of stock SKU: 2858 Category:

Description

Build your own quadcopter from the advanced kk2.1.5 combo kit which will help you to build your drone easier with all compatible hardware. Using our advanced KK 2.1.5 combo kit you will get all the products in one package which saves you money and time.

Note: Battery is not included. You need to purchase it separately. Recommended battery type for this kit is 3S (11.1v) LiPo Battery. The mAh in battery determines the flight time so choosing a higher mAh increases the flying time but also note that, it will increase the weight of your drone. Various LiPo Batteries are available here.

Specifications:

KK2.1.5 :

  • Size: 50.5mm x 50.5mm x 12mm
  • Weight: 21 gram (Inc. buzzer)
  • IC: Atmega644 PA
  • Gyro/Acc: 6050MPU
  • Auto-level: Yes
  • Input Voltage: 4.8-6.0V
  • AVR interface: standard 6 pin
  • Signal from Receiver: 1520us (5 channels)
  • Signal to ESC: 1520us

Simonk 30A ESC:

  • This 30 amp ESC for BLDC has onboard BEC.
  • This ESC comes with a male dean T-connector.
  • Auto Low BATTERY Slow down at 3.0V/cell Lipo, cut-off at 2.9V/cell lipo.
  • APPLICATION: Multirotors, Rc Airplanes, etc.
  • This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv, 2200kv)

A2212 BLDC Brushless motor :

  • Number of cells: 2-3s Lipo
  • Maximum efficiency current: 6-12A (·>75%) No load current (10v): 0.7A
  • Maximum current: 16A/60
  • Maximum efficiency: 78%
  • Internal resistance: 65mΩ
  • Poles: 14
  • Maximum watts: 180W
  • Motor bolt pattern (back of motor): 16mm x 19mm (hole to hole)
  • X-mount hole pattern: 32mm x 32mm (hole to hole)
  • Dimensions Motor size: 27.5mm x 30mm
  • Shaft size: 3.17mm
  • Weight: 47g

F450 Frame :

FrameF450
Diagonal wheelbase450mm
Frame weight282g
Takeoff weight800g-1600g

FS-i6 Transmitter and Reciever:

Transmitter specification :

  • Channels: 6
  • RF range: 2.4000-2.485GHz
  • Bandwidth: 500KHz
  • Band: 160
  • RF power: less than 20 dBm
  • 2.4G system: AFHDS
  • Code type: GFSK
  • Sensitivity: 1024
  • Low voltage warning: yes(less than 9V)
  • DSC port: yes(PS2; output: PPM)
  • Charger port: yes
  • Power: 12V DC(1.5AA*8)
  • Weight:590g
  • Size: 191*93*302mm
  • Color: black

RX Specification:

  • Channels: 6
  • RF range: 2.40-2.48GHz
  • Bandwidth: 500KHz
  • Band sum: 160
  • RF.receiver sensitivity: -105dBm
  • 2.4G system: AFHDS
  • Code type: GFSK
  • Sensitivity: 1024
  • Power:4.0-8.4V DC
  • Weight:13g
  • ANT lenght: 26mm
  • Size: 45*23*9mm
  • Color: Gray(Transparent)
  • Certificate: CE FCC

B3 AC charger :

  • Input Voltage: 110-240 V AC
  • Output Current: 3× 700 mA
  • Display: 3× Bicolor LED Max.
  • Charging Current: 3× 850 mA
  • Size: 100 mm * 60mm * 35mm
  • Battery : 2-3s lipo 

Kit includes :

Product Name Quantity
F450 Quadcopter Frame with PCB1
A2212 BLDC 1400KV Motors 4
Simonk 30A ESC4
KK2.1.5 Flight Controller Board1
1045 Propellers (CW & CCW)2 Pair
FlySky FS-i6 2.4G 6CH PPM RC Transmitter With FS-iA6B Receiver (Battery Not Included)1
IMAX B3 Charger 1
32 in 1 Multi-Purpose Precision Screwdriver1
Battery Strap1
Zip Ties1 Pack

Your suggestions are welcome. If you need any additional products that can make this kit better, we will consider your suggestion on upgrading the kit. Please leave us your thoughts in comments or in the email.

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.